MG type of silicone rubber heater




Features

  • Different types of heaters such as round, triangle, or ones with holes offered at reasonable prices. Minimum order of one piece, with a quick delivery option.
  • High thermal response due to low thickness, with a standard thickness of 1.5mm.
  • Easy fit on cylinders, cones, and various curved surfaces because of its high flexibility.
  • Available from low temperature through 200°C [392°F].
  • Different designs including low voltage, 100V, 200V and 240V types available.

* (approximately 20 percent magnetic power degradation at 200°C [392°F].)
 

Power Density

  • Power density range of 0.8-1.5 w/cm2 (5.16-9.68w/in2) is suitable for our H type in most cases, but this rate may vary depending on installation conditions or methods of thermal control. Please contact us with questions.

Specifications

Heat tolerance
Heat Tolerance
250°C
Max temperature
300°C
Electric properties
Capacity Tolerance
±10%
Insulation Resistance
100MΩ or over/DC500V
Electric Strength
1500V/1min
Size
Max
800mm×3000mm
Min
25mm×50mm
Thickness
1.5mm

 

Correspondence Thermoregulator

 

Overheat Preventer