Standard silicon rubber heater
- Different types of heaters such as round, triangle, or ones with holes offered at reasonable prices.
- Minimum order of one piece, with a quick delivery option.
- High thermal response due to low thickness, with a standard thickness of 1.5mm.
- Easy fit on cylinders, cones, and various curved surfaces because of its high flexibility.
- Available from low temperature through 200°C [392°F].
- Different designs including low voltage, 100V, 200V and 240V types available.
- Power density range of o.6-o.8W/cm2 (3.87-5.16W/in2) is suitable for our standard type in most cases,
- but this rate may vary depending on installation conditions or methods of thermal control.
- Please contact us with questions.
| Heat tolerance |
Heat Tolerance |
200°C |
| Max temperature |
250°C |
| Electric properties |
Capacity Tolerance |
±10% |
| Insulation Resistance |
100MΩ or over/DC500V |
| Electric Strength |
1500V/1min |
| Size |
Max |
800mm×3000mm |
| Min |
25mm×50mm |
| Thickness |
1.5mm |
| OT-9 Separated type |
Pt100Ω Sensor
K Thermo-couple |
| OT-9 PRO |
K Thermo-couple |
| EGO |
0-40°C, 30-110°C, 60-200°C |
| Bimetal Switch |
10°C-200°C Temperature preference |
| Thermal Fuse |
77°C-240°C Temperature preference |
|