1. Product construction:
ITO heater, is constructed on a layer of electrically conductive transparent film.
The lead wire is attached with the bus-bar to provide the electrical connection. 
we are backing the optical grade adhesive on the non-view area. 
Customer can easy install this flat heater with LCD module together.

2.Operation:
Applying power to flat heater through lead wire, ITO heater will generate a uniform heat on the surface.
Our suggestion the maximum wattage is 1.0 Watt/inch sq.
3.Function:
● No electrical wire in the view area. 
● Flat film structure.
● Easy installation.
4.Specification:
● Light transmission : over 80% 
● Thickness : < 0.5 ±0.1mm(with release film)
● Electrical characteristics.
Input Voltage : depending on customer’s LCD module’s power 
Wattage density: < 1.0 Watt/inch sq. 
● Environment characteristics:
Temperature : -40℃ - 90℃
Humidity : 5% - 95%